Epoxy Resin Carbon Fiber Adhesive For Construction Retrofitting And Strengthening
Carbon Fiber Primer
Carbon Fiber Leveling Adhesive
Carbon Fiber Reinforced Polymer
Epoxy Resin Carbon Fiber Adhesive For Construction Retrofitting And Strengthening
Xinchor Carbon Fiber Adhesive is a two-component, no poison, no stimulating smell Eco-friendly products. widely used in structural reinforcement of beams, floor slabs, bridges, piers, the seismic reinforcement of the deck and all kinds of concrete structure reinforcement project.
This product is high performance epoxy resin fiber bonding adhesive, an be used for effectual permeable bonding between concrete, steel, ceramic, stone, wood and other substrates with carbon fiber, glass fiber, basalt fibers, aramid fibers etc. Mainly used for building reinforcement.
Characteristics of Primer
• Good compatibility with carbon fiber.
• Strong penetration, can well infiltrate into the concrete surface.
• Aging, water resistance and chemical corrosion resistance
• Excellent physical mechanical properties after curing, strong toughness with a certain degree of elasticity.
Application Range
• Reinforce the substrate concrete after chiseled.
• Used for steel, ceramic, stone, wood component and carbon fiber, glass fiber, basalt fiber, aramid fiber.
• Mainly used for the strengthening and reinforcement of buildings.
| Technical Parameters | |
| Appearance | Component A: transparent viscous liquid |
| Component B: brown viscous liquid |
| Mixture ratio | A:B=2:1 |
| Pot life (min) | >30 |
| Finger touch dry time(25℃, h) | 1~2 |
| Bonding strength | C60 concrete damage |
| Steel-steel tensile shear strength | ≥20MPa, and structural adhesive cohesion damage |
| Steel-concrete pulling bonding strength | ≥2.5MPa, and concrete cohesion damage |
| Steel - steel T impact stripping length | ≤25mm |
Usage
- Adhesive for bonding external reinforcement to concrete, masonry, steel, wood, stone, etc.
- Structural bonding of composite laminates (Sika® CarboDur® CFRP) to concrete.
- Structural bonding of steel plates to concrete.
- Suitable for use in vertical and overhead configurations.
- As a binder for epoxy mortar repairs.
Proudct performance
1. Basic parameters
1) Appearence
Part A (main): transparent liquid
Part B (hardener): Brown transparent liquid
2) Mixed Viscosity: 4000-6000 Pa.s
3) Hardened density: 1.10±0.10g/cm3
4) Available handling time: (25℃): ≥30min
5) Shelf time: 12 months
Our Product Lines:
- Carbon Fiber Reinforcement System:
XQ-CFC 300gsm, 200gsm fabric and adhesives XQ-XW
- Steel Bonding System:
XQ-GZ Epoxy grouting adhesives,
XQ-JGN Plate bonding Adhesives
- Crack Repairing System:
XQ-GF Crack grouting adhesives,
XQ-FF crack seal adhesives
- Chemical Anchoring
390ml(3:1), 585ml(3:1), 650ml(1:1),
Our History:
15 years from 2000, ISO9001 approved, 40 employees, 5000m2 plant
Our Quality
All passed China National Standard lab testing, and be similar to CE and other countries standards
Product Tags:
|
|
Construction Retrofitting Carbon Fiber Adhesive Grey Cream Color CE Approved Images
|
